Metal-Tek® Anaerobic Threadlockers are adhesives for nuts, bolts, and screws to lock them in place and avoid loosening caused by stress and vibration. They replace traditional mechanical washers and fasteners, and are anaerobically curing chemicals that form a strong film in the gaps between the thread of the connection, locking it in place.

 

 

 

Applications: Suitable for use on threaded fasteners that will be exposed to vibration or repeated impacts. Even when vibration is not a factor, threadlockers are advised when a threaded assembly is critical to a product’s structure and function.

 

 

Product Features:

•  Low strength

•  Thixotropic viscosity

•  Can be disassembled with tools

 

 

Technical Specifications:

•  Color: Purple

•  Maximum Fill Gap: 0.13mm

•  Typical Use: For use on thread M2-8 (Ideal for under M6)

•  Content: 50ml

 

 

Physical Properties:

State-Uncured

•  Viscosity: 1200 thixotropic mPa.s (Test Method: GB/T2794-1995)

•  Specific Gravity: 1.05 g/cm³ (Test Method: GB/T13354-1992)

 

State-Cured

•  Break Torque: 6 N.m (Test Method: GB/T18747.1-2002)

•  Prevail Torque: 4 N.m (Test Method: GB/T18747.1-2002)

•  Working Temp.: -50 to 150 °C

 

Curing Speed

•  Full Cure: 10 to 30 min

•  Full Cure: 24 hr

 

 

Impa Code: 812751

 

For Technical/Material Safety Data Sheets or order inquiries, please contact us.