• Home_06 info@aste.com.sg
  • Home_08 (65) 6862 1212
Menu

Rubber Sheets & Rings

BLACK RUBBER SHEET

Plain Rubber Sheet.

Construction Feature

Made from natural rubber and compressed to sheet form.

Natural rubber has high resilience, good tensile strength and good tear resistance.

Applications

Water, gas, diluted solutions, low pressure and low temperature applications.

Specification

Work temperature: -55°C to +55°C (-67°F to +122°F).

INSERTION RUBBER SHEET

Cotton inserted Rubber Sheet

Construction Feature

Cotton inserted sheet is a rubber sheet with ply(s) of fabric impregnated in the rubber.Cotton inserted sheet material is designed to add stability where mechanical fastening isnecessary, and to reduce gasket creep where heavy flange loading is required. The ply(s) of fabric help reduce tearing when fastened.

Compound:

Standard sheet is a made of SBR (Styrene Butadiene Rubber). EPDM, Nitrile or Neoprene would be available based on request.

Color: Black

Weight: Approximate weight per square foot: 1/8″ weighs 1 lbs.

Temperature Range: -20°F to 170°F.

Minimum Tensile: 500 PSI or 4 MPA.

Finish: Smooth.

Minimum Elongation: 200%.

Gauges: 1/16″ 1ply, 1/8″ 2ply, 3/16″ 3ply, 1/4″ 4ply.

RUBBER CORD/STRING

Specification

Full range of rubber cord from 1.5mm to 15.0mm in stock.

Any length upon request.

SYNTHETIC RUBBER SHEET

Construction Feature

Made from natural oil-resistant rubber mix of petroleum, solvent, vegetable and animal oils.

High resilience, good tensile strength and good tear resistance.

Excellent resistance to various oils, water, gasoline, mild chemicals, hydrocarbons,refrigerants, steam and other inert gasses.

Applications

A good general purpose material.

NEOPRENE RUBBER SHEET

Neoprene sheet is a black colored rubber which is used where moderate oil, petroleum,ozone and weathering-resistance is needed. It is very popular due to the broad range ofapplications in which it may be used.

Specification

Blend of SBR (Styrene Butadiene Rubber), CR (Neoprene) and NBR (Nitrile) rubbers.

Color: Black.

Weight: Approximate weight per square foot: 1/8″ weighs 1-1/4 lbs.

Temperature Range: -20 °F to 212 °F.

Minimum Tensile: 725 PSI or 5 MPA.

Finish: Smooth.

Minimum Elongation: 300%.

Gauges: 1/16″, 1/8″, 3/16″, 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1.5″.

Widths: 1 metre.

PSA: CCT TF-1574 series pressure sensitive adhesive.

Roll Length: 25ft. or 50ft.

FKM RUBBER SHEET

Viton sheeting, known as Fluoroelastomer or FKM, is highly appreciated for the most demanding industrial applications as it has the highest resistance to hydrocarbons, acids, alkalis and even oxidants, and its mechanical properties remain intact at temperature up to 200°C. Tensile Strength: 6-8MPA Elongation: 300% High temperature: 200°C Hardness 75+/15 Shore A Applications: Industrial maintenance […]